OpenSCAD design for power meter enclosure

posted in: 3D printing | 0

I recently bought a AC Power meter module from eBay,  (if the item is no longer listed on eBay, try searching on eBay for “AC264V30A”), but the module is designed to be panel mounted and doesn’t have a back, hence live (mains voltage) wires are exposed.



So I designed a box so it could be used stand alone


So I’ve designed and 3D printed a box for this device. Note the model file has posts to attach a cable clamp but I’ve not finished the design for this yet (watch this space).



STL file



powermeter_case_2 powermeter_case_3 powermeter_case_1